EXPANSION MODULES

Active/Passive Toggle Switch:

• The active/passive toggle switch comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Switch Board Dimensions: 14.2mm x 19.4mm
• Available in Standard Chrome (Round), Premium Black (Flat) and Premium Chrome (Flat).

Coil Tap / Mid-Frequncy Toggle Switch:

• The coil tap / mid-frequency toggle switch comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Switch Board Dimensions: 14.2mm x 19.4mm
• Available in Standard Chrome (Round), Premium Black (Flat) and Premium Chrome (Flat).

Standby (Kill) Toggle Switch:

• The standby (kill) toggle switch comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Switch Board Dimensions: 15.8mm x 20.2mm
• Available in Flat Black and Round Chrome

Push/Pull Active/Passive Volume Pot:

• The push/pull active/passive volume pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm.
• Circuit Board Dimensions: 29.7mm x 21.1mm

Stacked Dual Mid-Range Pot:

• The stacked dual midrange pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm top and 8mm bottom.
• Circuit Board Dimensions: 28mm x 19.9mm

High Mid-Range Pot:

• Use this module for an upper midrange bite. Add jumpers to the mid frequency switch connector to drop the frequency for more bark. Or add an optional mid frequency switch and choose on the fly.
• The high midrange pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm.
• Circuit Board Dimensions: 26.7mm x 17.7mm

Low Mid-Range Pot:

• Use this module for a strong midrange punch. Add jumpers to the mid frequency switch connector to drop the frequency for the fattest finger sound around. Or add an optional mid frequency switch and choose on the fly.
• The low midrange pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm.
• Circuit Board Dimensions: 26.7mm x 17.7mm

Single Volume Pot:

• The single volume pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm.
• Circuit Board Dimensions: 29.7mm x 21.1mm

Stacked Volume/Passive Tone Pot:

• The stacked volume/passive tone pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm top and 8mm bottom.
• Circuit Board Dimensions: 29.1mm x 18.4mm

Passive Tone Pot:

• The passive tone pot comes installed on the Flex Core switch PCB adapter and will include the applicable cable to allow you to add it to your Flex Core preamp.
• Shaft Size is 6mm.
• Circuit Board Dimensions: 18mm x 13.2mm