Add your deal, information or promotional text

4-ON THE FLOOR

Genzler 4 On The Floor Classic Bass Overdrive Pedal

Control Panel Bullet Icon4 TYPES OF OVERDRIVE

Waveform Bullet IconALL ANALOG FOR A NATURL FEEL

Configuration Bullet IconA TRULY DIVERSE OFFERING OF GAIN CHANNELS IN A SINGLE PEDAL

empty box iconFREE SHIPPING IN THE USA
configuration iconEXPERT TECHNICAL SUPPORT
checklist iconIN STOCK MEANS IN STOCK

DESCRIPTION

The 4 On The Floor Classic Bass Overdrive offers 4 separate “gears” of variable analog overdrive textures and harmonic content to shift through, along with a clean blend feature. HPF and LPF controls are included to shape the overdrive engine’s signal path. This pedal offers touch sensitive asymmetrical and symmetrical overdrive characteristics, variations of compression and overdrive complexity, along with a true bypass. The versatility allows this to be used as a clean boost, along with the various overdrive gears, up to all out heavy saturated drive. This pedal also offers another level of versatility as it accepts nearly any power supply; 9 – 18 Volts, either polarity. (Power supply not included).

The 4 On The Floor™ Classic Bass Overdrive is an all analog bass overdrive pedal that gracefully emulates 4 different overdrive types found in classic tube circuit topologies and then gives the player additional control over drive/gain, overdrive path (only) with high pass and low pass filters and separately a clean blend. The result is the ability to tailor and fine tune the overdrive to fit with a wide spectrum of music and playing techniques, without the loss of touch sensitivity, musicality, or the addition of induced excess noise. This versatile pedal can be used as a clean boost, an “always on” tonal enhancement, or offering varied overdrive textures to shift through, for selected performance requirements.

Descriptions of the Drive Select “Gears”:

  • 1st GEAR: Reminiscent of a tube amp’s clean channel (including natural harmonics) with a bit of overdriven tone when driven hard. A nice “always-on” selection.
  • 2nd GEAR: Emulates a tube amp’s mildly overdriven tone, with a small amount of dynamically compliant clipping asymmetry. This is a natural feeling, touch sensitive algorithm with very mild compression that responds with more texture and complexity, the harder you dig in.
  • 3rd GEAR: A more aggressive up-shift from 2nd gear, this moderate, asymmetrical overdrive is less compliant, with greater compression for a tighter feel.
  • 4th GEAR: This is the most aggressive gear of all — a heavier, symmetrical, low compliance overdrive that can enter distortion territory when driven hard. While there are a lot of harmonics and compression present, this gear does not give up tone or feel.

TECHNICAL

User Manual

Dimensions:
5” [12.7cm] Long
4.1” [10.4cm] Deep
2.3” [5.8cm] High

Weight: 1 Lbs. [0.45Kg]

Accepts Power Supplies From 9VDC – 18VDC (low noise type), Either Polarity (auto detecting) 40mA Max — (Power Supply Not Included)



FEATURES

Lightweight Aluminum Chassis

Rugged Stomp Switches

Low-noise, Silent Switching Circuitry

4 Position Overdrive “Gear” Selector Switch

High-Pass and Low-Pass Filters (Overdrive Engine Only)

Parallel Clean Signal Path

High/Low Drive Sensitivity Switch

SPECIFICATIONS

Input Impedance: >1M ohm

Output Impedance: 1k ohm

Overdrive Engine Input HPF: 30Hz – 200hz

Overdrive Engine Output LPF: 1kHz – 14kHz

Input Sensitivity (nominal): -20dBu (high sensitivity), -10dBu (low sensitivity)

Maximum Input Level: 0dBu (9V supply), +5dBu (12V supply), +10dBu (18V supply), high sensitivity, DRIVE at 9:00

Maximum Input Level: +5dBu (9V supply), +12dBu (12V supply), +18dBu (18V supply), low sensitivity, DRIVE at 9:00

Maximum Output Level: +9dBu (9V supply) +14dBu (12V supply), +20dBu (18V supply)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

We use cookies on our website to give you the best shopping experience. By using this site, you agree to its use of cookies.

Search FatBassTone.com

Top suggestions