The EBS MicroBass 3 is a 2-channel preamp, built exclusively with premium components. It is engineered by EBS in Sweden with technologies from the famous HD360 and Fafner II amplifier designs.
The preamp operates at a signal level equal to a professional mixing console which gives you plenty of headroom. The high signal level makes it suitable to use as a preamp in combination with any type of power amp.
Run the Clean and Drive channels in series or parallel. Use the dual balanced XLR-outputs to tap the signal post and pre EQ at the same time.
With 10 Mohms input impedance, it handles any type of bass – passive, active, or with piezo pickups.
The built-in tuner makes it easy to tune between songs without the need of an external device. The MicroBass 3 also carries an onboard compressor, similar to the one found on several EBS amplifiers.
The analog EBS MicroBass 3 ensures your sound – every time.
**Sorry international bassists, but US Dealers are not authorized to ship EBS pedals outside of the US. Please contact us if you are having trouble finding EBS products in your home country.
Dimensions:
6.6" [168mm] Wide
4.9" [124mm] Deep
2.1' [53mm] High
Weight: 1.5 lbs. [660 g]
Input Impedance:
Gain:
Character:
Bright:
Filter Section:
Comp/Limit
Input: Input Impedance 1.8 Mohms // 22 pF
Drive: Gain Range 40 dB
Engines:
Type: Thin/Normal/Deep Pre Drive EQ
Filter Section:
Loop Signal Level nominal -10 dBv
Gain Unity (1:1)
Output Impedance <100 ohms
Input Impedance >200 kohms // 22 pF
Recommended Impedance 32 - 200 ohms
Input Impedance 20 kohms>
Nominal Level -10 dBv
Recommended Impedance 32 - 200 ohms
Output Impedance <1 kohms
Signal Level nominal 0 dBv
Output Level nominal -20dBv
XLR Connections 1-GND, 2-Hot, 3-Cold
Options Pre/Post EQ, L/R Ch. in stereo mode
Power Requirements Idle 450mA @9V. Max 750mA @9V (with headphones at max output level)