Add your deal, information or promotional text

PW-OBP3-Vpp-Mpp-T/B

Aguilar OBP-3 Bass Preamp Custom Kits

Original Bullet IconALL PRE-WIRED OBP3 PREAMPS NOW UTILIZE SOLDERLESS CONNECTIONS!!!

checklist bullet iconLOTS OF CONFIGURATIONS AVAILABLE

wave form bullet iconCLEAN & CLEAR TONE

wrench bullet iconMAKE INSTALLATION EASY -> LET US PRE-WIRE THIS FOR YOU

data science bullet iconAGUILAR'S MOST SONICALLY FLEXIBLE PREAMP

hand protest bullet iconADD POWER & FORCE WITH TONS OF BOOST & CUT

 

empty box iconFREE SHIPPING IN THE USA
configuration iconEXPERT TECHNICAL SUPPORT
checklist iconIN STOCK MEANS IN STOCK

 

DESCRIPTION

Give your bass some ballz with one of the most powerful preamps available. With 16-18dB of boost/cut available, the Aguilar OBP3 can really add (or cut) a lot to any and all of the three frequency bands. Carefully chosen switchable mid frequencies (400 & 800Hz) allow you to be heard amongst your bandmates.

Our Aguilar OBP3 Bass Preamp Custom Kits include the components that you need to install this in your bass.

This kit includes:

  • Aguilar OBP-3 module
  • Potentiometers and switches (if applicable)
  • Stereo Jack
  • 2 Battery Clips

This kit does NOT include:

  • Pickups
  • Knobs

Black round switches included with configurations requiring switches.

Harnesses are professionally wired in the Fat Bass Tone shop.

All of our pre-wired harnesses are now wired using solderless connectors. This means that you should be able to install the harness without any soldering. A mini flathead screwdriver is included to allow you to screw down the terminals on to the necessary wires. Read more here.
(*If you are installing into a bass with a barrel jack, you may need to solder a couple connections) or grab one of our prewired barrel jacks)

We offer the custom kits kits in both pre-wired and non-prewired. These customs kits go a step further than the standard Aguilar kits and provide more of the components needed. Pre-wiring delivers you a preamp that is almost to the finish line, just the final couple connections and installation into the bass is all you need to do.

Learn more about our Aguilar Bass Preamp Pre-Wiring Service here

**Sorry international bassists, but US Dealers are not authorized to ship Aguilar OBP Custom Kits outside of the US. Please contact us if you are having trouble finding Aguilar products in your home country.

LAYOUTS

1 Pickup - 3 Knob (VPP-MPP-T/B)
Volume w/Active-Passive Push-Pull -- Push-Pull Mid -- Treble/Bass Stack

1 Pickup - 3 Knob & 1 Switch (V-MPP-T/B-APSW)
Volume -- Push-Pull Mid -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 4 Knob (VPP-BL-MPP-T/B)
Volume w/Active-Passive Push-Pull -- Blend -- Push-Pull Mid -- Treble/Bass Stack

2 Pickup - 4 Knob & 1 Switch (V-BL-MPP-T/B-APSW)
Volume -- Blend -- Push-Pull Mid -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 4 Knob & 1 Switch (VPP-BL-M-T/B-MSW)
Volume w/Active-Passive Push-Pull -- Blend -- Mid w/Switch -- Treble/Bass Stack

2 Pickup - 4 Knob & 2 Switch (V-BL-M-T/B-MSW-APSW)
Volume -- Blend -- Mid w/Switch -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 5 Knob (VPP-BL-T-MPP-B)
Volume w/Active-Passive Push-Pull -- Blend -- Treble -- Push-Pull Mid -- Bass

2 Pickup - 5 Knob & 1 Switch (V-BL-T-MPP-B-APSW)
Volume -- Blend -- Treble -- Push-Pull Mid -- Bass -- Active-Passive Switch

2 Pickup - 5 Knob & 1 Switch (VPP-BL-T-M-B-MSW)
Volume w/Active-Passive Push-Pull -- Blend -- Treble -- Mid w/Switch -- Bass

2 Pickup - 5 Knob & 2 Switch (V-BL-T-M-B-MSW-APSW)
Volume -- Blend -- Treble -- Mid w/Switch -- Bass -- Active-Passive Switch



TECHNICAL

Preamp Specifications:

  • Bass control: plus/minus 18 dB @ 40 Hz
  • Mid control: plus/minus 16 dB @ 400Hz or 800 Hz. User selectable frequency center
  • Treble control: plus/minus 16 dB @ 6.5 KHz
  • Input impedance: 1 meg ohm
  • Output impedance: 100 ohm 9 or 18 volts operation
  • Distortion: .019 into 10k ohm load
  • Noise: -95 dBm unweighted
  • Battery life: 324 hours
  • Wire lead length: 6.50 inches
  • Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available
  • Dimensions: 0.98″W x 0.98″L x 0.59″D
  • Warranty: Three year limited warranty





Customer Reviews

Based on 78 reviews
99%
(77)
1%
(1)
0%
(0)
0%
(0)
0%
(0)
J
James b.
Bass Gear

Simply amazing! The next level of product Fat Bass Tone is simply amazing. Within two months I have bought two sets of pickups and a preamp. I will use Fat Bass Tone for four other up a coming projects .

T
Tony C.
Aguilar OBP-3 Bass Preamp

The product is fantastic, I was impressed with the different tone, clarity, and the ability to dial in the sound/tone you're looking for on the fly. Most importantly, is the overall performance of my bass, the OBP-3 took it to the next level; the knobs are so smooth and the responses are great. Finally, the ease of installation since Fat Bass Tone (FBT) professionally prewired the OBP-3. Kudos to the FBT Family of outstanding techs and customer service.

T
Theron B.
Prewired OBP3 Preamp

The preamp arrived wired and soldered perfectly. It was a big time saver. I wish we had the option of wire length but it fit fine!

R
Ronald R.
I Love Fatbasstone

As usual fast reliable service!!!
I never have to worry about my part being out of stock when I make a purchase because they will tell you upfront.

L
Lamont M.
OPB 3 Preamp Wired Push Pull Mids

Preamp soldering was impeccable!! Easy to install. Super fast shipping. If you have basic soldering skills to solder pickup and ground wires, definitely the way to go. Awesome sounding preamp too.

We use cookies on our website to give you the best shopping experience. By using this site, you agree to its use of cookies.

Search FatBassTone.com

Top suggestions