PW-OBP3-Vpp-Mpp-T/B

Aguilar OBP-3 Bass Preamp Custom Kits

Original Bullet IconALL PRE-WIRED OBP3 PREAMPS NOW UTILIZE SOLDERLESS CONNECTIONS!!!

checklist bullet iconLOTS OF CONFIGURATIONS AVAILABLE

wave form bullet iconCLEAN & CLEAR TONE

wrench bullet iconMAKE INSTALLATION EASY -> LET US PRE-WIRE THIS FOR YOU

data science bullet iconAGUILAR'S MOST SONICALLY FLEXIBLE PREAMP

hand protest bullet iconADD POWER & FORCE WITH TONS OF BOOST & CUT

 

empty box iconFREE SHIPPING IN THE USA
configuration iconEXPERT TECHNICAL SUPPORT
checklist iconIN STOCK MEANS IN STOCK

 

DESCRIPTION

Give your bass some ballz with one of the most powerful preamps available. With 16-18dB of boost/cut available, the Aguilar OBP3 can really add (or cut) a lot to any and all of the three frequency bands. Carefully chosen switchable mid frequencies (400 & 800Hz) allow you to be heard amongst your bandmates.

Our Aguilar OBP3 Bass Preamp Custom Kits include the components that you need to install this in your bass.

This kit includes:

  • Aguilar OBP-3 module
  • Potentiometers and switches (if applicable)
  • Stereo Jack
  • 2 Battery Clips

This kit does NOT include:

  • Pickups
  • Knobs

Black round switches included with configurations requiring switches.

Harnesses are professionally wired in the Fat Bass Tone shop.

All of our pre-wired harnesses are now wired using solderless connectors. This means that you should be able to install the harness without any soldering. A mini flathead screwdriver is included to allow you to screw down the terminals on to the necessary wires. Read more here.
(*If you are installing into a bass with a barrel jack, you may need to solder a couple connections) or grab one of our prewired barrel jacks)

We offer the custom kits kits in both pre-wired and non-prewired. These customs kits go a step further than the standard Aguilar kits and provide more of the components needed. Pre-wiring delivers you a preamp that is almost to the finish line, just the final couple connections and installation into the bass is all you need to do.

Learn more about our Aguilar Bass Preamp Pre-Wiring Service here

**Sorry international bassists, but US Dealers are not authorized to ship Aguilar OBP Custom Kits outside of the US. Please contact us if you are having trouble finding Aguilar products in your home country.

LAYOUTS

1 Pickup - 3 Knob (VPP-MPP-T/B)
Volume w/Active-Passive Push-Pull -- Push-Pull Mid -- Treble/Bass Stack

1 Pickup - 3 Knob & 1 Switch (V-MPP-T/B-APSW)
Volume -- Push-Pull Mid -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 4 Knob (VPP-BL-MPP-T/B)
Volume w/Active-Passive Push-Pull -- Blend -- Push-Pull Mid -- Treble/Bass Stack

2 Pickup - 4 Knob & 1 Switch (V-BL-MPP-T/B-APSW)
Volume -- Blend -- Push-Pull Mid -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 4 Knob & 1 Switch (VPP-BL-M-T/B-MSW)
Volume w/Active-Passive Push-Pull -- Blend -- Mid w/Switch -- Treble/Bass Stack

2 Pickup - 4 Knob & 2 Switch (V-BL-M-T/B-MSW-APSW)
Volume -- Blend -- Mid w/Switch -- Treble/Bass Stack -- Active-Passive Switch

2 Pickup - 5 Knob (VPP-BL-T-MPP-B)
Volume w/Active-Passive Push-Pull -- Blend -- Treble -- Push-Pull Mid -- Bass

2 Pickup - 5 Knob & 1 Switch (V-BL-T-MPP-B-APSW)
Volume -- Blend -- Treble -- Push-Pull Mid -- Bass -- Active-Passive Switch

2 Pickup - 5 Knob & 1 Switch (VPP-BL-T-M-B-MSW)
Volume w/Active-Passive Push-Pull -- Blend -- Treble -- Mid w/Switch -- Bass

2 Pickup - 5 Knob & 2 Switch (V-BL-T-M-B-MSW-APSW)
Volume -- Blend -- Treble -- Mid w/Switch -- Bass -- Active-Passive Switch



TECHNICAL

Preamp Specifications:

  • Bass control: plus/minus 18 dB @ 40 Hz
  • Mid control: plus/minus 16 dB @ 400Hz or 800 Hz. User selectable frequency center
  • Treble control: plus/minus 16 dB @ 6.5 KHz
  • Input impedance: 1 meg ohm
  • Output impedance: 100 ohm 9 or 18 volts operation
  • Distortion: .019 into 10k ohm load
  • Noise: -95 dBm unweighted
  • Battery life: 324 hours
  • Wire lead length: 6.50 inches
  • Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available
  • Dimensions: 0.98″W x 0.98″L x 0.59″D
  • Warranty: Three year limited warranty





FREQUENTLY ASKED QUESTIONS

Is it possible to have a sweepable mid on the Aguilar OBP3?

No. The OBP3 does not support sweepable mids



Customer Reviews

Based on 93 reviews
98%
(91)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
L
Lawrence Y.
Impressive preamp

Previously, I have used a Bass Metaphors pre/direct box to get that extra ooomph. I installed the OBP-3 and it really makes a difference in the bass. i like the extra range on the EQ section and the preamp has a good sound, as well. I was a little worried about the signal being too hot, and the OBP not having a trim pot, but that isn't an issue at all, even at 18V. Currently i have this pre installed in a tradition neck thru (ash) using the Og factory soap bars, Vol, Blend, Mid, B/T, Mfs, APfs.

J
Joe T.
Aguilar OBP-3

Before I can comment on the actual product, I must state that I have been dealing with Max (Fat Bass Tone) for many years now. Being a luthier and bass builder for over 60 years Max always comes through. When I need sound advice or when I need to purchase electronics for my clients, he is my go-to. I often purchase Aguilar pickups and preamps and with 100% success. Thank you Max for your constant knowledge and support, Joseph Tessoun

L
Lee A.
Comme c'est doux !

Installed into my Ibanez SR1605. An excellent pairing with the Aguilar DCB humbuckers! Plenty of headroom with the 18v option.

M
Marc

Clean with clear tone .. but the output is very strong and will give dirty ground noises

W
Wayne

It’s a great product! The sound that this preamp gives is versatile!

Search FatBassTone.com