Add your deal, information or promotional text

HR‐3.3AP/918

Bartolini NTBT 2 Band Bass Preamps

original bullet iconA LONG HISTORY OF PROFESSIONAL USE

good bullet iconTRIM POT TO ADJUST OVERALL OUTPUT LEVELS

hand protest bullet iconCLEAN AND POWERFUL EQ CONTROL

inverter battery bullet icon9 AND 18 VOLT COMPATIBILITY

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
J
J.A.O.
Always have a great experience buying from FBT

I've had a great experience with both of my purchases. Max is very knowledgeable and takes the time to explain everything well, and helping you make the best selection. All purchased items have arrived quickly and without any issues. I did some research before choosing an online store to buy my bass upgrades, I am happy I choose Fat Bass Tone. You guys rock!!!

C
Christian

Great!

j
jacob hebeisen
Greatful they exist

Dealt with Max at BBG for years and now hes here, always a pleasure to deal with, knowledgeable and willing to work with you to make things right if there is an issue.
Hope fat bass tone is around for a long time to come;)

J
Joachim van Zoelen
Lovely experience

The contact I had with the guys at Fat Bass Tone, due to my purchase I made from them was great - really nice guys and an asset to the bass community. It was obvious that they were really committed to me getting what I needed, and that they cared about me being satisfied with the result. Which I was! :-)

K
Kevin Rawlings
Great tone!

Excellent product, did exactly what I needed and sounds fantastic. Would have been better with some longer wires, though, since the ones attaching the pots to the module weren't long enough to reach the battery compartment in my Bacchus. I had to cut them and solder in some extensions. Other than that, no complaints!

Thanks for your comments, Kevin. Glad the preamp sounds good! Bartolini pre-wires these preamps at their factory - We will pass on your thoughts about the wire length.

empty box iconFREE SHIPPING IN THE USA
configuration iconEXPERT TECHNICAL SUPPORT
checklist iconIN STOCK MEANS IN STOCK

DESCRIPTION

The voice is clear, transparent, and strong with wide boost and cut range for aggressive control. The NTMB features an adjustable gain which allows you to boost the input signal up to 12dB while maintaining flat frequency response.

A professionally pre-wired and fully pre-tested harness saves the time and aggravation of wiring your preamp and pots into your instrument. Wired with our pro-level preamp and premium audio-quality pots and switches, you’ll have smooth control and be ready for years of rugged use. Bartolini includes battery clips and an output jack for quick installation. All the pots are grounded with a wire that can be connected to the cavity shield or simply cut away if not needed in your installation. Everything is pre-soldered with pro-quality pure copper wire that is double tin plated and protected with semi-rigid insulation so it won’t flop around in the cavity or degrade over time. Bartolini uses only professional lead-free solder with non-corrosive flux.

A concentric knob set is included with harnesses which have a stacked pot. Bartolini does not include any other knobs with their preamps.

CONFIGURATIONS

HR-3.3AP/918 - 2 Pickup - 3 Knob (Volpp-Bl-T/B)
Volume w/Active-Passive Push-Pull -- Blend -- Treble/Bass Stack

HR-4.5AP/918 - 2 Pickup - 4 Knob (Volpp-Bl-T-B)
Volume w/Active-Passive Push-Pull -- Blend -- Treble -- Bass

Artists: David Wilson

TECHNICAL

  • Preamp Module Size: 1.76" [44.7mm] Long, 1.02" [25.9mm] Wide, 0.54" [13.7mm] Thick
  • Operating Voltage: 9V or 18V - Prewired for 9V. An additional battery clip is included for 18V wiring.
  • Gain Control: The in-cavity gain trimmer lets you adjust the output level of your instrument. This lets you match output levels from several instruments for consistent response from level-sensitive effect
    Gain: 0-12dB
  • Bass Control: Boost or cut your low frequencies up to 5 times the flat signal. The bass frequency is great for E, B, and low F# strings.
    Bass: +/-15dB@30Hz
  • Treble Control: Boost or cut your high frequencies to brighten or darken your tone. The NTBT gives you a constrained control range for precise voice adjustment.
    Treble: +/-16dB@6KHz

Bartolini 2 Band Bass Preamp wiring diagram

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
J
J.A.O.
Always have a great experience buying from FBT

I've had a great experience with both of my purchases. Max is very knowledgeable and takes the time to explain everything well, and helping you make the best selection. All purchased items have arrived quickly and without any issues. I did some research before choosing an online store to buy my bass upgrades, I am happy I choose Fat Bass Tone. You guys rock!!!

C
Christian

Great!

j
jacob hebeisen
Greatful they exist

Dealt with Max at BBG for years and now hes here, always a pleasure to deal with, knowledgeable and willing to work with you to make things right if there is an issue.
Hope fat bass tone is around for a long time to come;)

J
Joachim van Zoelen
Lovely experience

The contact I had with the guys at Fat Bass Tone, due to my purchase I made from them was great - really nice guys and an asset to the bass community. It was obvious that they were really committed to me getting what I needed, and that they cared about me being satisfied with the result. Which I was! :-)

K
Kevin Rawlings
Great tone!

Excellent product, did exactly what I needed and sounds fantastic. Would have been better with some longer wires, though, since the ones attaching the pots to the module weren't long enough to reach the battery compartment in my Bacchus. I had to cut them and solder in some extensions. Other than that, no complaints!

Thanks for your comments, Kevin. Glad the preamp sounds good! Bartolini pre-wires these preamps at their factory - We will pass on your thoughts about the wire length.

Search FatBassTone.com